MTP to MTP Fiber Patch Cable, OM3/OM4 10G 50/125, 12 Core
buy OM3/OM4 MTP to MTP Fiber Patch Cable 12 Strand, multimode OM3, OM4 10g fiber, high-speed data transmission, low insertion loss.
General Details
FOCONEC produces factory pre-terminated MTP to MTP Fiber Patch Cable in OM3 or OM4 fiber, used for the high-density & high-speed fiber cable transmission system.
Our MTP fiber cable adopts US CONEC standard or elite MTP connectors, fully compliant with the MPO standards, which are terminated on both ends of 10G OM3 or OM4 mini fiber trunk cable.
Factory pre-terminated MTP fiber patch cables are mainly used as interconnect jumper cables to link MTP or MPO cassettes, panels, backbone MTP / MPO assemblies with active equipment, facilitate rapid deployment of high-density backbone cabling in data centers and other high fiber environments.
Features:
- Fiber patch cable with MTP connectors
- Meets IEC Standard 61754-7
- standard and elite MTP connectors for options
- Compact dimension of ruggedized mini trunk fiber cables for High-Density fiber cabling
- LSZH, OFNP, OFNR cable jacket
- Fully compliant with the TIA/EIA 604-5 Type MPO connectors
- With PINs(male MTP) or without PINs(female MTP) connectors for option
- Polarity A, B, or C
- Factory terminated trunk cables & modularized cassettes, enclosures promise Rapid Deployment, saves installation and reconfiguration time
- 100% tested connectors, high-quality materials, long-term Reliability
- Fully factory checked with test report attached
Applications:
- 10/40/100 networks
- Array trunk cables
- Array fiber to single fiber fan-outs and cassettes
- High fiber density card edge access
- Optical switching interframe connections
- Structured cabling per TIA-568-C
- Parallel Optics
- SNAP 12
- POP 4
- QSFP
Order Guide:
| MTFC- | xxx | - | xxx | - | xxx | - | xx | - | xx | |
| Connector A | Connector B | Fiber Mode | Cable Type | Length | ||||||
| MTP | MTP male | MTP | MTP male | SM | SM 9/125 | 12 | 12 cores | 1M | 1 meter | |
| MTPF | MTP female | MTPF | MTP female | SBI | SM bend insensititive | 24 | 24 cores | 2M | 2 meters | |
| MPO | MPO male | MPO | MPO male | M1 | MM 62.5/125 | customized | ||||
| MPOF | MPO female | MPOF | MPO female | M2 | MM 50/125 | |||||
| M3 | MM OM3 10Gig | |||||||||
| M4 | MM OM4 10Gig | |||||||||
| Attn: | 1. Fan out length could be 30cm to max 1.5m | |||||||||
| 2. Cable Jacket could be OFNR, OFNP, LSZH. | ||||||||||
| 3. Bend insensitive fibers include G657.A2, G657.A2, and G657.B2. | ||||||||||
| 4. Fanout legs could be same length, or custom staggered |
Spec
MM MT Elite® | Standard Multimode MT Ferrule | SM MT Elite® | Standard Single-mode MT Ferrule | |
| Insertion Loss | 0.1dB Typical | 0.20dB Typical 0.60dB Maximum2,3,5 | 0.10dB Typical | 0.25dB Typical 0.75dB Maximum1,5 |
| Optical Return Loss | > 20dB5 | > 20dB5 | > 60dB (8° Angle Polish)5 | > 60dB (8° Angle Polish)5 |
1 As tested per ANSI/EIA-455-171 Method D3
2 As tested per ANSI/EIA-455-171 Method D1
3 As tested with encircled flux launch condition on 50um fiber and 850nm per IEC 61280-4-1
4 Compliant with IEC 61755-3-31/GRADE B
5 For 48-fiber MM MTs, 72-fiber MM MTs, or 24-fiber SM MTs, performance assumes physical contact on all fibers. For these higher fiber counts, physical contact may be difficult to achieve. Please see USCONEC’s FAQs for more details.
Enquiry
MPO-LC OM3 Cassette Module, 24 Fibers, LGX Footprint
buy pre-terminated MTP/MPO fiber cassette module 24 port, MTP/LC patch cables, adapters fully loaded, suitable LGX fiber patch panel, enclosures.
MPO / MTP to 4 Duplex LC Breakout Cable, Multimode OM3 10G Fiber
buy MPO to LC Breakout Fiber Patch Cable OM3, round distribution fiber cable, 8 cores, with breakout kit, 2.0mm fanouts