MTP to MTP Fiber Patch Cable, OM3 10G, 12 Core

buy OM3/OM4 MTP to MTP Fiber Patch Cable 12 Strand, multimode OM3, OM4 10g fiber, high-speed data transmission, low insertion loss.

General Details

MTP to MTP Fiber Patch Cable, OM3/OM4 10G 50/125 Fiber, 12 Core

FOCONEC produces factory pre-terminated MTP to MTP Fiber Patch Cable in OM3 fiber, used for the high-density & high-speed fiber cable transmission system.

Our MTP fiber cable adopts US CONEC standard or elite MTP connectors, fully compliant with the MPO standards, which are terminated on both ends of 10G OM3 or OM4 mini fiber trunk cable.

Factory pre-terminated MTP fiber patch cables are mainly used as interconnect jumper cables to link MTP or MPO cassettes, panels, and backbone MTP / MPO assemblies with active equipment, facilitating rapid deployment of high-density backbone cabling in data centers and other high fiber environments.

MTP connectors


  • Fiber patch cable with MTP connectors
  • Meets IEC Standard 61754-7
  • standard and elite MTP connectors for options
  • Compact dimension of ruggedized mini trunk fiber cables for High-Density fiber cabling
  • LSZH, OFNP, OFNR cable jacket
  • Fully compliant with the TIA/EIA 604-5 Type MPO connectors
  • With PINs(male MTP) or without PINs(female MTP) connectors for option
  • Polarity A, B, or C
  • Factory terminated trunk cables & modularized cassettes, enclosures promise Rapid Deployment, saves installation and reconfiguration time
  • 100% tested connectors, high-quality materials, long-term Reliability 
  • Fully factory checked with test report attached


  • 10/40/100 networks
  • Array trunk cables
  • Array fiber to single fiber fan-outs and cassettes
  • High fiber density card edge access
  • Optical switching interframe connections
  • Structured cabling per TIA-568-C
  • Parallel Optics
  • SNAP 12
  • POP 4
  • QSFP

Order Guide:

Connector AConnector BFiber ModeCable TypeLength
MTPMTP maleMTPMTP maleSMSM 9/1251212 cores1M1 meter
MTPFMTP femaleMTPFMTP femaleSBISM bend insensititive2424 cores2M2 meters
MPOMPO maleMPOMPO maleM1MM 62.5/125customized
MPOFMPO femaleMPOFMPO femaleM2MM 50/125
M3MM OM3 10Gig
M4MM OM4 10Gig
Attn:1. Fan out length could be 30cm to max 1.5m
2. Cable Jacket could be OFNR, OFNP, LSZH.
3. Bend insensitive fibers include G657.A2, G657.A2, and G657.B2.
4. Fanout legs could be same length, or custom staggered


MM MT Elite®
Multimode MT Ferrule

Multimode MT Ferrule

SM MT Elite®
Single-mode MT Ferrule

Single-mode MT Ferrule
Insertion Loss

0.1dB Typical
0.35dB Maximum2,3,5

0.20dB Typical
0.60dB Maximum2,3,5

0.10dB Typical
0.35dB Maximum1,4,5

0.25dB Typical
0.75dB Maximum1,5
Return Loss

> 20dB5

> 20dB5

> 60dB (8° Angle Polish)5

> 60dB (8° Angle Polish)5

1 As tested per ANSI/EIA-455-171 Method D3
2 As tested per ANSI/EIA-455-171 Method D1
3 As tested with encircled flux launch condition on 50um fiber and 850nm per IEC 61280-4-1
4 Compliant with IEC 61755-3-31/GRADE B
5 For 48-fiber MM MTs, 72-fiber MM MTs, or 24-fiber SM MTs, performance assumes physical contact on all fibers. For these higher fiber counts, physical contact may be difficult to achieve. Please see USCONEC’s FAQs for more details.

What can we do for you?

error: Content is protected !!